The ECO 10 allows the automatic integration of all 1-Wire sensors* with Auto-E-Connect to all controllers such as PLC or PC systems without having special knowledge about the 1-Wire protocol.ĮCO 501, 1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers ![]() All systems can access 1-Wire sensors and actuators via the ECO 10 1-Wire controller. a controller from Loxone, WAGO, Smart1, IP-Symcon, FHEM. Whatever system you want to use, the ECO 10, the intelligent system interface, is ready for it. Management of all ESERA sensors and actuators with suitable libraries and many standard 1-Wire modules and chipsĮxtensive software for commissioning, configuration and analysis Top-hat rail housing for control cabinet installation Power supply of the 1-Wire network with 5V voltage The ECO 10 1-Wire Controller represents a high performance 3rd generation 1-Wire interface for sensors and actuators.įully automatic integration of sensors* and actuators*ġ-Wire controller for autonomous communication and updating of the 1-Wire network.įast readout of all up to 30 1-Wire sensors, actuators or chips in 1-3 second cyclesĬyclic output of the processed 1-Wire data in 10 second intervals and in plain textĭata communication via socket server/client, TCP or UDPĭesigned for small to large 1-Wire networks The device is delivered with DHCP settings.ĮCO 10, 3rd generation 1-Wire controller, the intelligent system interface to all smart home controllers from temperature sensors the temperature in C° plain writing delivered. The device has extensive configuration and formatting possibilities, which are read out and operated by ESERA Config-Tool 3 or by terminal program (e.g. The output is ready formatted as ASCII characters via the computer interface to your controller. It independently recognizes new 1-Wire sensors/actuators and cyclically supplies the values that have been checked and adapted to the sensor. The EC 1 Gateway represents the autonomous management of 1-Wire sensors and 1-Wire actuators (e.g. The EC 1 Gateway allows the integration of all 1-Wire sensors to all control systems like PLC or PC systems without special knowledge about the 1-Wire protocol. a controller from Loxone, WAGO, Smart1, IP-Symcon, FHEM, and many others no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface, the EC 1 Gateway. Formerly 1-Wire Controller 1.Whatever system you want to use, the intelligent system interface, the EC 1 Smart Home Sensor-Gateway is ready for it.ĭo you have e.g. The EC 1 Gateway has been the optimal device for applications in your smart home for over 10 years. 25☌ bis +70☌, Extended temperature range 1, (E1)ĮC 1 Smart Home Sensor Gateway, the intelligent system interface to all Smart Home Systems 25☌ to +70☌, Extended temperature range 1, (E1) Reverse polarity protection for voltage supply / power supply.Overvoltage protection for the voltage supply / power supply.Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use.System supply, 12VDC (1-Wire auxiliary voltage).System supply, 5VDC (1-Wire main voltage).Plug and Play support, Auto-E-Connect Support: According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is DIN rail, Top-hat rail or also called mounting rail.Internal backup capacitor / buffer / abblock capacitor for stable operation, important for industrial use.Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): Plastic with high percentage of recycled plastic, green (RAL 6020). Open circuit board with ABS plastic base. Industrial 1-Wire Bus (12V, 5V, 1-Wire Data und Masse (GND)) ![]() Parasitic operation is not supported (2-wire operation without 5V power supply).
0 Comments
Leave a Reply. |